Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Glendale, CA
Chimney repair in Glendale typically runs between $350 and $3,800 depending on whether you’re replacing a cap, repointing a crown, or installing a full stainless liner. Most Glendale homes we work on were built between the 1920s and 1980s, so the repairs we do here are rarely cosmetic – they’re structural, driven by real winter burning followed by months of hot, dry exposure. Imperial Chimney has served Glendale since 2017, and we handle the full arc: inspection, cleaning, repair, and liner restoration under one roof. Call (866) 253-3809 when you need someone who can explain what they found and show you the photos to prove it.
Why Glendale Homes Are Different
Glendale is one of the few LA-area cities where wood-burning fireplaces are still a genuinely common, actively-used appliance. The hillside and canyon-edge neighborhoods – the 91201, 91202, and 91206 ZIP codes around Chevy Chase Canyon and Glenoaks Canyon – are packed with older homes that have real masonry fireplaces seeing actual winter use, not decorative gas logs. That means the creosote we remove here is the real thing: dense, tar-like buildup from genuine wood fires, not the light soot you’d find in a fireplace that never gets lit.
The housing stock itself shapes the repair work. Down in the flats – 91203, 91204, 91205 – you’ll find 1920s-40s Spanish Revival and Craftsman bungalows with original masonry chimneys that have survived nearly a century of seismic settling and Santa Ana wind. Up in the Verdugo foothills, you get mid-century ranches and 1960s-80s custom homes, many with pre-fab or metal fireboxes that fail differently than masonry. In the hillside streets above the 134 and Glenoaks, we regularly find chimney caps crushed or dislodged by falling eucalyptus and pine debris, and roofs steep enough that the job is a fall-protection problem before it’s even a sweeping problem. Glendale also enforces its own municipal code and permit processes, so staging, roof access, and documentation look different here than they do across the border in Burbank or LA.
Styles & brands we work with
Our Main Glendale Services
Most Glendale homeowners call us for one of two things: a thorough chimney sweep before burning season, or dryer vent cleaning to remove the lint buildup that causes thousands of house fires every year. Both are fire-safety jobs at their core, and both get done by the same trained team that handles our repair work.
Chimney Sweep in Glendale
A proper chimney sweep in Glendale isn’t just running a brush up the flue. Given how many hillside homes here have real wood-burning fireplaces with genuine creosote accumulation, we treat every sweep as an inspection opportunity: we document the flue condition, check the cap and crown, and photograph anything that looks like early-stage damage. The dry summers and Santa Ana winds mean roof debris – eucalyptus bark, pine needles, small branches – ends up on and around chimneys constantly, so cap inspection is part of every visit. Details on what we do and what it costs are on the Chimney Sweep in Glendale page.
Dryer Vent Cleaning in Glendale
Dryer vent cleaning addresses the leading appliance-related house fire cause, and Glendale’s older housing stock makes it particularly relevant here. Many homes in the flats have long, multi-bend dryer vent runs that were installed decades ago and never re-routed, which is exactly the kind of setup where lint packs into elbows and restricts airflow. We clean the full run from dryer to exterior termination, verify proper airflow, and tell you if the vent material itself needs replacement. See the Dryer Vent Cleaning in Glendale page for pricing and process.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Glendale
Most Glendale chimney repair calls start with visible damage – a missing cap after wind season, water staining on the ceiling near the fireplace, or crumbling mortar on the crown. The housing era matters here: a 1920s Craftsman in the flats and a 1970s foothill ranch fail in different ways, and the repair approach has to match the construction. We use the same materials restoration contractors trust – Chimney Repair is our core craft, and we stock the components that make repairs last rather than patching over the problem with whatever’s on the truck.
Chimney Cap Installation
Signs you need it
You don’t have a cap, or the old one is rusted through, missing sections, or sitting loose after a windstorm.
What it costs in Glendale
Chimney cap installation in Glendale typically costs between $350 and $900 depending on cap size, material, and roof access difficulty.
How we do it
We measure the flue opening, select a correctly-sized cap from our stocked Gelco and Copperfield options, secure it to the flue tile or crown with the proper hardware, and verify the fit before we leave the roof.
Chimney Liner Installation
Signs you need it
Your clay tile liner is cracked, spalling, or has gaps between tiles that let heat and gases reach the surrounding masonry.
What it costs in Glendale
Chimney liner installation in Glendale runs $2,900 to $3,800 in most homes, with the price driven by flue height, roof pitch, and whether the old liner needs to be broken out first.
How we do it
We run a video camera down the flue to document the existing condition, size the new liner to the appliance and flue dimensions, install a DuraFlex stainless liner from the top down, insulate as needed, and re-verify the system with a second camera pass.
What Chimney Repair Costs in Glendale
| Item | Typical range in Glendale |
|---|---|
| Chimney cap installation | $350 – $900 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $500 – $1,500 |
| Chimney liner installation | $2,900 – $3,800 |
Hilltop homes with steep roof pitches and hard staging access lean toward the upper end of every range. We give you a flat price before work starts, and nothing changes unless you approve a written revision.
Should I repair or replace my chimney cap?
Replace it. A bent or rusted-through cap has already lost its structural integrity, and repair rarely costs less than a new unit once labor is factored in. In Glendale’s wind and falling-debris conditions, we almost always recommend replacement over patching.
Do I really need a new chimney liner, or can it wait?
It depends on what the camera shows. Cracked clay tiles are a fire and carbon monoxide risk that should not wait; minor surface wear can often be addressed with HeatShield resurfacing instead of a full liner replacement. We show you the footage before recommending anything.
Brands We Service in Glendale
We stock and install DuraFlex liner systems, Gelco caps, Famco venting components, and Copperfield chimney products – the same professional-grade materials restoration contractors and fire-safety inspectors specify. Parts for most common Glendale chimney repairs are on the truck, not ordered in, which keeps most jobs to a single visit. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Glendale, CA
| Service | Typical range in Glendale |
|---|---|
| Chimney sweep (standard) | $185 – $280 |
| Chimney sweep (with inspection report) | $225 – $350 |
| Chimney cap installation | $350 – $900 |
| Chimney cap replacement | $400 – $950 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $500 – $1,500 |
| Chimney liner installation | $2,900 – $3,800 |
| HeatShield resurfacing | $1,800 – $2,800 |
| Dryer vent cleaning | $130 – $180 |
| Dryer vent inspection | $80 – $120 |
Roof pitch pushes price up faster than anything else in Glendale – a walkable roof on a 1950s ranch in the flats is a different job than a steep hillside access above Glenoaks. Whatever the number, you approve a flat price before the work starts.
Neighborhoods We Serve in Glendale
We work across all of Glendale, from the old bungalow blocks in the flats to the canyon homes above the 134. Our technicians know which streets have steep driveways, tight staging, or HOA rules about roof access, and we schedule accordingly.
- Chevy Chase Canyon
- Glenoaks Canyon
- Rossmoyne and Verdugo Woodlands
- Adams Hill
- Sparr Heights and Montrose
Most Glendale appointments are booked within a week, and hillside properties sometimes get a slightly longer lead time because we send a two-person crew for fall-protection work.
Service Area – Cities Near Glendale
Imperial Chimney is based in Koreatown and serves Glendale plus the surrounding foothill and eastside communities. We cover Burbank, CA with the same attention to hillside chimney conditions, handle the steep properties in La Cañada Flintridge, CA, and work through the older housing stock of Echo Park, CA and Silver Lake, CA where 1920s chimneys are common.
Serving Glendale, CA — Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glendale
Most repairs are scheduled within five to seven business days. If you have a water leak or visible cap damage, let us know when you call – we hold a small number of same-week slots for active leaks and fire-safety issues. Call (866) 253-3809 for current availability.
Most repairs – caps, crowns, flashing, and liners – don’t require a permit under Glendale’s municipal code for like-for-like replacement. HOA approval depends on your neighborhood; hillside HOAs sometimes request documentation or specific staging rules. We’ll tell you what we expect before scheduling, and we provide written documentation if your HOA asks for it.
All of them. We service every Glendale ZIP code we cover – 91201, 91202, 91203, 91204, 91205, 91206, 91208, 91222, 91225, and 91226 – from the flats below the 134 to the top of Glenoaks Canyon. Hillside jobs get two-person crews for roof safety, but the service area doesn’t vary.
For a free estimate in Glendale, call Imperial Chimney at (866) 253-3809. We’ll walk you through what we found, show you the photos, and give you a flat price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glendale Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Salma Haddad"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Christine Lin"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Shannon Hoffman