Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Chimney repair in Burbank usually means working on a fireplace that was built between 1925 and 1955, with a clay tile flue that has absorbed decades of Southern California temperature swings and winter inversions. We’re Imperial Chimney, and we handle the full arc of chimney health for Burbank homeowners: sweeping, structural repair, and liner restoration. The typical job here costs $250 to $550 for cap replacement, $900 to $2,300 for a chimney crown rebuild, and $2,200 to $6,500 for a full liner install. Call (866) 253-3809 when you want a straight answer, not a sales pitch.
Why Burbank Homes Are Different
Burbank’s original housing stock runs from 1920s California bungalows in the blocks south of downtown through the 1940s and 1950s ranch homes of Magnolia Park and the Rancho area. Those houses were built with real masonry fireplaces and clay tile flues. That’s good material, but it’s now 70 to 100 years old, and the tiles have been through thousands of heat cycles. Add in Burbank’s closed basin climate – hot, dry summers, cool damp winters, and periodic no-burn days when an inversion traps smoke at ground level – and a fireplace that drafts marginally becomes a problem fast. We also see homes where an original wood-burning fireplace was capped or sealed during a remodel, then a gas insert was planned years later. The old flue is still there, but it needs a camera inspection before anyone should connect a new appliance to it. In the older bungalow blocks around Magnolia Park, our techs routinely find retrofit inserts venting through flues that were sized for open wood fires, not sealed gas units. That undersized venting is a carbon monoxide risk most homeowners don’t know they have.
Styles & brands we work with
Our Main Burbank Services
Most Burbank homeowners call us for one of two jobs: a routine chimney sweep or a dryer vent cleaning. Both are fire-safety services, and both address hazards that accumulate over years without anyone noticing.
Chimney Sweep in Burbank
Burbank’s winter burn bans mean fireplaces sit unused for stretches, then get fired up suddenly when air quality clears. That stop-start pattern lets creosote build up in odd layers. A sweep removes that deposit, checks for cracking tiles and animal nests, and confirms the damper actually seals. In older bungalows, we often find that a “non-functioning” fireplace is just sealed in a way that hides real problems behind the cap. Read the full scope on our Chimney Sweep in Burbank page.
Dryer Vent Cleaning in Burbank
Lint buildup in dryer vents is the number one cause of appliance-related house fires, and Burbank’s small-lot homes often route dryer exhaust through long, angled runs that trap lint faster than a straight shot. A clogged vent also makes your dryer run longer, which matters when energy costs climb. We clean the full run from dryer to exterior termination and show you the buildup we removed. See the complete service detail on our Dryer Vent Cleaning in Burbank page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Burbank
Chimney repair in Burbank is rarely about a single visible failure; it’s more often about a flue that has been quietly degrading for decades. The 1920s through 1950s homes that define most of this city were built with clay tile liners that crack under repeated thermal stress, and Burbank’s basin climate – damp winters followed by hot dry summers – accelerates that cycle. We regularly see flues in Magnolia Park and Rancho homes where the original tiles are still in place but spalling, which means the chimney is venting into the wall cavity rather than out the top. Imperial Chimney has served Burbank since 2017, and our approach to repair always starts with a camera inspection so you can see exactly what we see. No repair recommendation is made without visual evidence, because you shouldn’t have to take a contractor’s word for a liner failure you can’t verify. Our full repair scope lives on the Chimney Repair page.
Chimney Cap Installation
Signs you need it
You see water staining on the ceiling near the fireplace, hear birds or animals in the flue, or your existing cap is rusted through and no longer seated flush on the crown.
What it costs in Burbank
Expect to pay $180 to $400 for a standard cap install, or $300 to $650 if you choose a Gelco stainless model with a stronger spark arrestor.
How we do it
We measure the flue opening, set the cap squarely over the tile or liner top, and secure it with stainless hardware so it doesn’t shift during the Santa Ana winds that cut through the basin.
Chimney Cap Replacement
Signs you need it
The old cap is corroded, missing mesh panels, or was knocked loose and you can see daylight gaps where the cap should seal against the crown.
What it costs in Burbank
Replacement typically runs $380 to $780, including removal of the failed cap, surface prep, and installation of a new stainless or copper unit.
How we do it
We remove the old cap, check the crown surface underneath, and install the replacement using a mechanical fastening system rather than relying on adhesive alone.
Chimney Liner Installation
Signs you need it
Your camera inspection shows cracked, spalled, or missing clay tiles, or an older home has had a gas insert installed into a flue that was never sized or rated for that appliance.
What it costs in Burbank
The cost depends on the liner type and flue size: $1,800 to $3,400 for a gas flue, $2,200 to $4,800 for wood, and $4,200 to $6,500 for a hybrid or high-efficiency setup.
How we do it
We build the new liner from DuraFlex components, drop it through the existing chase or masonry flue, insulate it where the Burbank building code requires, and reconnect the appliance with proper termination at the cap.
Chimney Flashing Repair
Signs you need it
Water is staining the ceiling inside, the flashing is lifting away from the roof line, or there’s visible rust and cracking at the point where the chimney meets the roof.
What it costs in Burbank
Flashing repair or replacement usually falls between $350 and $900 for a Burbank bungalow with a standard brick chimney.
How we do it
We cut out the old flashing, install new step and counter flashing with proper overlap, and seal the joint with a polymer sealant that handles both the summer heat and winter damp.
Chimney Crown Repair
Signs you need it
The crown is cracked, crumbling at the edges, or sagging in a way that channels water into the flue rather than off the top of the chimney.
What it costs in Burbank
A standard crown rebuild runs $900 to $1,900 and includes reforming the concrete surface with a proper drip edge and slope away from the flue opening.
How we do it
We clean and prep the existing surface, form and pour a new crown with the correct overhang, and wait the required cure time before installing the cap back over the flue.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Chimney cap installation | $180 to $650 |
| Chimney crown rebuild | $900 to $1,900 |
| Chimney liner installation | $1,800 to $6,500 |
Does a cracked flue always need a new liner?
No. Small cracks can sometimes be addressed with a HeatShield resurfacing application, which restores the flue interior without full demolition. We’ll only recommend a full liner if the camera shows structural failure that resurfacing can’t safely fix.
How long does chimney repair take in Burbank?
Most cap, flashing, and crown repairs are completed in a single visit. Liner installation usually takes one full day. Burbank’s mild weather means we can schedule most repair work year-round without freeze delays. Call (866) 253-3809 for a time estimate on your specific chimney.
Brands We Service in Burbank
We stock and install Gelco caps, DuraFlex liner systems, and HeatShield resurfacing materials for Burbank jobs, and can source Olympia Chimney and Famco components quickly when a specific configuration calls for them. That means less waiting for parts and faster completion on common repairs. See the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney cap installation | $180 to $650 |
| Chimney cap replacement | $380 to $780 |
| Chimney liner installation (gas flue) | $1,800 to $3,400 |
| Chimney liner installation (wood flue) | $2,200 to $4,800 |
| Chimney liner installation (hybrid/efficiency) | $4,200 to $6,500 |
| Chimney flashing repair | $350 to $900 |
| Chimney crown rebuild | $900 to $1,900 |
| Chimney sweep | $189 to $350 |
| Dryer vent cleaning | $129 to $250 |
Two things push cost up in Burbank more than anywhere else: flues that were never upgraded when a gas insert replaced a wood fire, and 100-year-old masonry that needs more prep work than a newer build. We quote a flat price after our inspection, before any work begins, so the number you hear is the number you pay.
Neighborhoods We Serve in Burbank
Imperial Chimney works across all of Burbank, from the pre-war bungalow blocks south of downtown through Magnolia Park and the Rancho. Most of the ZIP codes we cover – 91501, 91502, 91523, and 91526 – are within a short drive of our dispatch route. Response time is typically same-week for sweeps and inspections, with repair jobs scheduled around parts availability.
- Magnolia Park
- Rancho Adjacent
- Downtown Burbank
- Burbank Hills
- The Verdugo foothills area
Service Area – Cities Near Burbank
Beyond Burbank, Imperial Chimney regularly serves the surrounding communities in the San Fernando Valley and eastern Verdugo foothills. If you’re in a neighboring city, you can check your local page below. We cover Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA. Call (866) 253-3809 to confirm service in your neighborhood.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
Most cap replacements, crown repairs, and sweeps in Burbank don’t require a permit. Liner installations may trigger a permit depending on the scope and the existing structure. We’ll tell you exactly what applies to your job before we start, and we handle the paperwork on permitted work.
Most Burbank appointments are scheduled within a few days for sweeps and inspections. Repair work depends on the specific fix and current parts availability, but typical scheduling is one to two weeks out. Call (866) 253-3809 to see what the current lead time is.
Yes. Our route covers the full Burbank service area, including the hillside and canyon-adjacent streets above downtown. Those homes often have taller chimneys and more wind exposure, which changes the cap and flashing requirements, so we always schedule extra time for uphill jobs.
If your Burbank chimney hasn’t been inspected in the last few years, or you’re planning to bring an old fireplace back into use, start with a conversation. We’ll show you what we find and explain what actually needs fixing now versus what can wait. Call Imperial Chimney at (866) 253-3809 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Gabriela Torres"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Adam Sutton"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Adriana Garcia