Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Sherman Oaks, CA
Chimney repair in Sherman Oaks usually means fixing cracked crowns, separated flashing, and damaged flue tiles on mid-century masonry stacks that have baked through decades of Valley heat. We’re Imperial Chimney, and we’ve served Sherman Oaks since 2017. Most homes here don’t have heavy creosote buildup the way colder climates do. The real issue is structural: earthquake stress, drought-shrunken mortar, and Santa Ana wind damage. Call (866) 253-3809 if your chimney needs a professional look.
Why Sherman Oaks Homes Are Different
Sherman Oaks sits in the San Fernando Valley, where summers run hot and dry and Santa Ana winds blow hard from the northeast. That combination shapes the work we do. Most fireplaces in the 91403, 91423, and 91413 ZIP codes get occasional use, not nightly wood burning. Creosote is usually light but extremely dry, which means even a thin layer becomes a fire hazard faster than the wet, sticky buildup you’d see in a coastal climate. The drier the flue, the more important it is to remove what’s there before it ignites.
The housing stock tells the same story. South of Ventura Boulevard, you’ll find 1940s and 1950s ranch homes with original masonry chimneys and clay flue tiles. Many of those tiles have cracked from decades of thermal cycling and minor seismic movement. In the hills, tall exterior chimney stacks take direct sun and wind. We regularly repoint mortar joints there that have turned to powder. The 1980s and 2000s infill builds, common in pockets throughout Sherman Oaks, often have factory-built metal fireboxes that were never designed for heavy use. Those need a different kind of inspection, focused on rust, panel gaps, and clearances rather than masonry.
Drought and wildfire season add another layer. A missing or damaged spark arrestor on a Sherman Oaks chimney isn’t a minor detail. When embers are moving through dry brush canyons, any opening at the top of a flue becomes a potential entry point. We treat every Sherman Oaks chimney inspection as a fire-safety check first and a cleaning second.
Styles & brands we work with
Our Main Sherman Oaks Services
Most homeowners in Sherman Oaks call us for one of two reasons: they need a routine chimney sweep, or they need a dryer vent that’s no longer moving air. Both are fire-safety issues, and both are jobs we handle directly.
Chimney Sweep in Sherman Oaks
A chimney sweep in Sherman Oaks is as much an inspection as a cleaning. We remove what’s there, whether that’s light creosote in a wood-burning fireplace or accumulated debris in a gas-log setup, then we check the flue, crown, flashing, and spark arrestor. Given the dry conditions and Santa Ana winds here, the condition of your spark arrestor matters as much as the cleanliness of the flue. We document what we find and show you photos. Read more on our dedicated Chimney Sweep in Sherman Oaks page.
Dryer Vent Cleaning in Sherman Oaks
Dryer vent cleaning addresses a hazard most Sherman Oaks homeowners never see. Lint accumulates inside the vent run, restricting airflow and raising temperatures. In Valley homes where dryers often sit in interior utility closets with long vent runs to the exterior, that buildup happens faster than in homes with short, direct vents. We clean the full run from dryer to termination point and confirm airflow afterward. Details are on our Dryer Vent Cleaning in Sherman Oaks page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Sherman Oaks
Chimney repair in Sherman Oaks typically means addressing what the climate and the 1994 Northridge earthquake set in motion: cracked clay flue tiles, deteriorated mortar joints, crowns that no longer shed water, and flashing that has lifted away from the roofline. On mid-century masonry stacks and tall hill-area chimneys, these problems compound quietly. A small crack in a crown lets winter rain into the flue, where it rusts dampers and accelerates tile breakdown. A separated flashing lets water run down the outside of the stack and into the chase. This is the most common repair profile we see in the 91403 and 91423 areas. Our Chimney Repair work covers the full arc: diagnosis, material selection, and restoration using the same professional-grade components restoration contractors rely on.
Chimney Crown Repair
Signs you need it
Hairline cracks in the concrete crown, spalling chunks missing from the top of the stack, or water staining on the ceiling near the fireplace are all indicators the crown is failing.
What it costs in Sherman Oaks
Chimney crown repair in Sherman Oaks typically runs $150 – $350 for a standard recoat, with full rebuilds at $600 – $1,200 depending on stack size and access.
How we do it
We assess the existing crown’s condition, remove loose material, apply a proper slope-correcting new layer or full rebuild, and finish with a waterproof sealant matched to Valley weather exposure.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling around the fireplace, damp drywall near the chimney chase, or visible gaps between the flashing and the roofline are the classic markers in Sherman Oaks homes.
What it costs in Sherman Oaks
Flashing repair in Sherman Oaks generally runs $200 – $500 for targeted resealing, with full replacement at $500 – $1,200 when the flashing is corroded or torn.
How we do it
We remove the old flashing, inspect the roofing interface for hidden water damage, install new metal flashing with proper overlapping seams, and seal every junction with high-grade roofing sealant.
What Chimney Repair Costs in Sherman Oaks
| Item | Typical range in Sherman Oaks |
|---|---|
| Chimney crown repair | $150 – $350 (recoat) / $600 – $1,200 (rebuild) |
| Chimney flashing repair | $200 – $500 (repair) / $500 – $1,200 (replacement) |
| Chimney liner installation | $1,800 – $3,500 (typical full install) |
Do I really need a new chimney liner?
Only if your existing liner is cracked, separated, or missing entirely. In Sherman Oaks, earthquake stress and years of thermal cycling crack clay tiles. We scope the flue and show you photos before recommending anything.
Can a cracked chimney crown wait until next year?
Not in Sherman Oaks. Winter rain enters through even hairline cracks, rusting dampers and breaking down flue tiles. What’s a $300 recoat this year becomes a $1,500-plus rebuild after another wet season. Call us for a free estimate.
Brands We Service in Sherman Oaks
We stock and install chimney components from our brands: Gelco caps, Olympia Chimney liners, Famco venting, and Copperfield products. Parts are sourced through professional supply channels, which keeps turnaround on common repairs within days rather than weeks.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Sherman Oaks, CA
| Service | Typical range in Sherman Oaks |
|---|---|
| Chimney sweep (standard, one flue) | $169 – $339 |
| Chimney sweep with gas insert | $189 – $289 |
| Chimney cap installation | $200 – $500 |
| Chimney cap replacement | $150 – $400 |
| Chimney crown repair | $150 – $350 (recoat) / $600 – $1,200 (rebuild) |
| Chimney flashing repair | $200 – $500 (repair) / $500 – $1,200 (replacement) |
| Chimney liner installation | $1,800 – $3,500 |
| Dryer vent cleaning | $89 – $169 |
What pushes price up in Sherman Oaks is access. Hill-area stacks with steep roof pitches and long ladder runs cost more than a simple one-story ranch off Ventura Boulevard. We quote flat prices before work begins, so you know exactly what you’re paying before we start.
Neighborhoods We Serve in Sherman Oaks
We work throughout Sherman Oaks, from the flat sections north of the 101 to the hills south of Ventura Boulevard. Typical response time across the area runs one to three business days depending on our booked schedule.
- South of Ventura Boulevard hills
- Sherman Oaks Estates
- Longridge Estates area
- North of the 101 flats
- Fashion Square area
Service Area – Cities Near Sherman Oaks
Our service area extends into the surrounding Valley communities. We also serve Valley Glen, CA, Van Nuys, CA, Studio City, CA, and Encino, CA. If you’re just over the line from Sherman Oaks, call and we’ll confirm coverage for your address.
Serving Sherman Oaks, CA — Our Local Coverage Area
We’re based in the Sherman Oaks area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Sherman Oaks
Most Sherman Oaks appointments are scheduled within one to three business days. We dispatch from Koreatown and route Valley jobs together when possible. If you have a water leak or a visibly damaged cap, we’ll work to get to you sooner.
Most routine sweeps and repairs like cap replacement, flashing repair, and crown recoat don’t require a city permit. Structural rebuilds or liner installations may. We’ll tell you plainly if your job crosses that line before any work starts.
Yes. Many townhome and condo communities in Sherman Oaks require contractor insurance certificates on file before work begins. We provide those documents quickly. If you’re in a gated community, coordinate access with your HOA and we’ll handle the rest.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sherman Oaks Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Adam Sutton"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Adriana Garcia"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Salma Haddad